Wednesday, November 26, 2014

Water Well Maintenance Tips

If you have a water well in your home you need to take good care of it if you expect it to serve you for many years to come. Water wells are designed to serve modern homes and rural settings for many years with minimal maintenance demands. You need to check with your owner’s manual and find out what needs to be done on a daily basis in order to maintain the water well.

1.     If you are yet to install a water well, make sure the job is done by a licensed and certified contractor. Water well drilling and pump installation is not a small job. It must be handled by an expert. The system must also be serviced by a certified technician.

2.     Always make sure you invest in an annual well maintenance check. A number of things will be done during this annual maintenance including testing the area for bacteria. If the well is used to store drinking water then the bacteria test needs to be done more frequently. You also need to look out for signs of discoloration or change in taste of water.

3.     Do not store hazardous items close to your well. Things like paint, fertilizers and pesticides shouldn’t be stored anywhere near the well. They can easily spill over and pose a risk to human life. You also need to make sure the well is covered well and that the well cap is not broken or cracked. Any form of damage on the well cap needs to be repaired immediately.

4.     When choosing the ideal place to install the well, make sure you choose an area that is not so close to buildings, waste systems or facilities used for chemical storage. Wells need to be in an environment that is free from contamination. A professional contractor knows what to look out for before installing a well.

5.     Whenever you are landscaping close to your well, make sure the top of the well is at least a foot above the ground. You need to take care when you are working close to the well. Don’t start digging close to the area because rocks may damage the casing and lead to poor sanitation. Also make sure you check the casing after you finish working your landscape just to make sure it’s not damaged.

6.     Look out for any changes in your well. If you notice stagnant water or a foul smell coming from it then it’s time to call a well technician to step in and resolve the issue. Make sure your well records are in proper place so that the contractor can keep track of the water testing and system maintenance.

Maintaining a well is not hard work. Take good care of your well and pumping system and you won’t have to spend a lot of money in future dealing with costly repairs. A well maintained well will serve you for a long time to come. Work with a professional contractor to maintain proper sanitation and a reliable well system. 

Posted By: KCW Water Well

Saturday, November 15, 2014

In Home Water Tank Installation

Plumbing Rainwater Tanks
Many homeowners are having rainwater tanks plumbed into the house to decrease their environmental impact, make water available for the garden in times of water restrictions and simply to enjoy the taste of sparkling clean rainwater! Additionally, in many states it is now mandatory to have rainwater tanks plumbed into newly built houses. For those of you that are facing the task of getting the water from 'there' to 'here', we have a complete guide to your necessary preparations and the work.
Decide where you'll be plumbing it to
If you have an open rainwater tank, or live in a heavy industrial area, it is advisable to plumb the rainwater tank only to non-drinking sources inside your home. In these cases you should plumb your rainwater tank to the toilets, hot water service, taps used for the washing machine and irrigation.
Do you need a seamless automatic switching device?
If your rainwater tank was required to be installed by legislation (as in newly built homes), you'll need to have a seamless automatic switching device between the tank and the ordinary reticulated supply. This ensures that your plumbing isn't damaged (and you don't have to run out and manually move an irrigation switch) if the rainwater tank runs dry.
You'll need a licensed plumber
If your rainwater tank is required to be installed under the law, there'll usually also be a proviso about using a licensed plumber - for safety's sake. Even if you aren't legally required to install a tank, your council may require that you use a licensed plumber for the installation. Besides, who wants the headache?
Special materials must be used
If you're planning to supply your own installation materials to save a bit of cash, there are often regulations that they'll need to meet. For example:
• Materials must be Watermark Certified
• Piping must have the words 'Rain water' printed on it at 500mm or lower intervals
• Water outlets must be labelled as rain water
• Hot water service inlet pipes must be labelled as rain water
All the labelling will need to be done with approved signs... unfortunately you can't just get out the permanent marker!
Backflow prevention is a must
Due to the possibility of rainwater from a contaminated roof making it into the house, all rainwater plumbed to outlets shared with the reticulated supply must have backflow prevention devices attached. It's an extra cost, but the requirement carries pretty hefty fines if you don't meet it.
You may be able to install a non-testable backflow prevention device if you've taken other precautions
Testable devices for backflow prevention are required for buried and partly buried rainwater tanks; however if you have other protective measures installed, you may be able to use a non-testable device. Of course, there's other advantages to installing these as well... better tasting water is just one of those! They include:
• Gutter guards
• Filters
• First flush devices
• Dry inlets
• Mosquito and vermin guards
There's little 'real' work that homeowners must, or even can, do when it comes to plumbing rain water tanks Melbourne, it is always best to leave such jobs to the experts - but there is a fair bit that you'll need to know, regulations-wise.

Solarflow offer professional advice and design expertise on rain water tanks Melbourne, solar hot water and heat pumps. With summer fast approaching, do your bit to preserve our resources by installing rain water tanks Melbourne.
Posted By: KCW Water Well

Tuesday, October 21, 2014

How to Find a Suitable Well Pump

How to Find a Suitable Well Pump
If you rely on your well pump to get drinking water for your home, you’ll need to find a good replacement when the time comes. Now choosing a well pump can be a tough decision. You must be careful and select the right size and type of pump. If you already had a well pump in your home, the first thing you’ll have to do is identify the type.

There are basically three types of well pumps used in residential areas: centrifugal pump, jet pump and submersible pump. If you have a shallow well then chances are that a centrifugal pump is in use. This pump contains only a single pipe and is used to lift water not more than 25 feet. Jet pumps can be used in both shallow and deep wells.

 A shallow jet pump contains a single pipe and can also lift water only up to 25 feet. However, a deep jet pump can be used to lift water to higher levels, that is, deeper than 25 feet from the ground. This is because it contains two pipes instead of one. The first pipe is used for suction whereas the other is mainly used to enhance operation of the pump. The large jet pumps can be used to pump water up to 50 feet.

Submersible well pumps are the ones most commonly used in residential areas. They can be used to pump water in both shallow and deep wells. The smaller submersible pump, which costs less money, can fit on a smaller well. The submersible pumps usually contain a single pipe that is connected to a pressure tank. The good thing about this pump is that it will only lift water when needed. It is installed close to the bottom of the well.

When replacing your pump, you need to know the size of the existing well pump. There are models that offer more horsepower and they are known to last longer and run less often. However, you need to be very careful when selecting the power of your well pump and avoid having too much power.
Also consider the depth of the well when choosing a suitable pump. If the lift capacity is quite high then you can use a 4 inch submersible pump. A shallow well jet pump is ideal for depths below 25 feet. In order to determine the well’s depth to the water, look at the driller’s well report. It should be clearly stated in this document.

It is also important to know how much water your home needs before selecting a well pump. Consider the amount of water you’ll need for the showers, appliances like dishwashers and outdoor irrigation needs. A regular home with three to four bedrooms will only require 8 to 12 gallons of water per minute. In case you still find it hard to purchase a new well pump, seek expert advice. Look for a contractor who specializes in well pumps and ask them for suitable recommendations. 

Posted By: KCW Water Well

Monday, October 20, 2014

Choosing A Reliable Well Repair Service

Other than offering a reliable and sustainable supply of water, wells provide high quality water that is free of contaminants. Wells are also low maintenance and have very minimal operating costs. You'll need to hire a well contractor in order to get this system installed properly and repaired whenever there's a need. Here's how you go about choosing the right well repair contractor.

First, choose a well repair service that is offered by experienced people who understand your local geology. In order for a company to be allowed to drill wells in your region, the drillers must fulfill certain guidelines. It is important to hire a licensed well contractor so that the well is drilled based on the set standards.

Before recommending any type of well, the contractor should assess the typical water quality in the region, the trends in well design as well as how previous drilled wells have performed in that area. These records of water wells in the area will help the contractor select a reliable well for your property.

Ensure the well repair service you are about to hire has a good reputation. Ask for references from the service providers and call previous clients to check whether they are satisfied with their wells. Make sure the contractors are insured as well and that their prices are competitive. Sometimes the cheapest price may not offer the kind of quality you're looking for.

A reliable well repair service should provide clients with a guarantee on workmanship and materials used to construct the well. They should have a contract or agreement that includes all the costs, materials and procedures to be followed during construction.

Remember that the performance and safety of the well will depend on where it's drilled. With the help of an expert, you can look at various sites where the well can be constructed in your property. If it's a farm or acreage, make sure you don't have any plans to build detached structures. There are also state regulations that limit where and how you can drill wells.

Your other top concern should be to keep the well clean and safe throughout the year. Since most contaminants will enter the well through the casing, it must be constructed in a way that possible contamination is greatly avoided. You'll have to enlist the services of a contractor to help you keep your well safe and clean.

Make sure you perform regular maintenance, testing and cleaning of the well as per the expert's recommendation. You can choose either bored wells or drilled wells. Bored wells are considered more prone to contamination compared to drilled wells. Drilled wells are smaller in diameter but they provide a more reliable water supply because they are not affected by seasonal weather.

There are many people who offer well repair services so make sure you get the right experts. Find out if they offer a variety of repair services so that you're not restricted. A good well repair service should offer you unmatched customer service, great advice and high end products.

Water Problems? Call a company you can trust!
Family owned since 1951. KCW Water Well is open 24 hours a day 7 days a week.

Friday, August 22, 2014

A Quick Look at Water Well Pumps Irrigation Uses

Both rural and extensively remote regions make use of water well pumps irrigation uses to provide this liquid for sustaining life. There are other applications for these devices that can help beautify the planet while saving time and money. Let's take a closer look at some of the areas of life where these units may be of assistance in making improvements in your life.

Well service may be mandatory for people who live in rural areas where there are no city supplied water utilities. Whether it is from a well dug deep into the ground, or a source provided from a natural spring, a pump is needed to bring this liquid into the home. Bathing, laundry, and household cleaning along with food preparation need this life giving fluid.

A pump can also be set up for use by livestock. It is set up in such a manner that, as the livestock drink enough, the water level decreases and a plunger activates the mechanism. This makes it possible for them to have plenty of fresh H2O to sustain life and remain fully hydrated. Without the convenience of a pump, the rancher would have to haul this liquid from other sources to the location of their herds.

When people raise their own food, they are not at liberty to trust annual rainfall. There can be seasons of too much rain and then seasons of drought causing everything to die from lack of rainfall. With an irrigation system individuals can defy climatological patterns and regulate the moisture content of the soil by programming the hours of the day, or night, for the system to engage. They may be the only property for miles around that has a lovely lawn and green pastures.

Equipment involved requires a few fittings. Brass fittings, that connect pipes and valves, are needed to prevent loss of liquid while delivering it to the destination. Shut off valves, pressure gauges and flow control devices are part of constructing a system that will function properly. A holding tank provides a place for water to remain for immediate use until the pump engages and starts production of additional volume.

When it comes to water well pumps irrigation uses, lives can depend on supplying this life sustaining liquid. Not only do people and animals depend on it, but plants and lawns must have this nourishment to survive. It might be a good idea to find out more about how these systems can help you save time and money.

You can find information about the many uses of water well pumps for irrigation [] and details about different well pump options at [] now.

Posted By: KCW Waterwell

Sunday, August 3, 2014

Water Well Service Basics

Are you planning on installing water well or have water well. Either way, you should know the basics about the well so you can make the right decisions regarding your water well. There are many water well services available online. Nowadays, everyone is into saving money and maintaining those water wells is not easy. Finding the right water well service is the most vital part.

Well Repair
Water well repair may be required for many reasons due to failure in equipment, corrosive quality of the water, or depletion of the aquifer. Here we will try to guide you in identifying the problem and choose the appropriate action required. Before you call for a well repair professional, it is better you pinpoint the issue so you can hire the right service. For this, you need to find out the issue. It can be the motor not starting or vice-versa Perhaps the water pressure is very low.

Water Well Installation
If you have plans for a water well installation, then you should know the procedure, so you know what is happening and what to expect. The geological condition and the intension of usage depend on the construction method. 

Nevertheless all methods follow these steps:

1. Drilling: The drilling method varies by hand or by machines. But, the end result is one - A borehole. Most drilling methods are accomplished by using rigs to reach the desired depth.

2. Installation of casing and screen: On reaching the desired depth the drill crew installs the casing and the screen.

3. Installing artificial packs: In some wells, you will require to fit an artificial filter pack around the screen. This process has to be done before the grouting and sealing of the well.

4. Grouting the well: To prevent any downward leakage of contaminants from the surface into the well, grouting is done by filling the space between the casing and the borehole with clay.

5. Develop the well: This is the process of maximizing the well’s yield. During drilling process, the formation or the aquifer can get damaged, hence; the process of drilling bits of rocks and plugging the well screen reduces the yield of the well.

Apart from water well installation, another procedure you should be aware of is well drilling. Well drilling is used to drill a hole in the ground to extract a natural resource from the ground like water. In America, more than 15 million homes have water well. And, half of the nation’s drinking water comes from the water wells of the municipal.

Before you engage someone for water well drilling you should be familiar with the process. You have to remember the cost of getting a well drilled will cost you more than getting a connection from the municipal. Make sure you know the specific location of where your well can be drilled. Find out if any wells were drilled in your property before you purchased the property. Do check out all maps including geological and topographic maps to evaluate the location of the aquifers and rock formations.

Posted By: KCW Water Well

Saturday, July 12, 2014

Well Pump Repair: Common Water Pump Problems

If you've owned a home, chances are you've experienced problems with water pressure. Whether it's a complete loss of flow pressure, or intermittent and inconsistent flow, water pressure trouble always seems to come at the most inconvenient time. Some homeowner’s water pressure problems may be persistent, such as constantly low water pressure, while others may experience an occasional but sudden lack of water pressure. While it's always best to have a professional water well contractor make repairs, it's good to know as much about your home's well water system as possible so that you can make the most informed decision possible when it comes to well pump repair.

Bad or No Well Water Pressure

Water wells are complicated machines, as are the pumps that pull the water from the well into your home. As with any complex mechanical system, a single problem can have more and more causes as the system increases in intricacy. (Anyone who has owned a car or a computer knows this truth well.) When it comes to low water pressure, the problem can range from problems with the pressure tank, worn pumps, clogged pipes and pumps, and even clogged filters and purification systems. The problem may be mechanical or electrical, or may be caused by the water your specific well is drawing from (for example, water with higher iron concentrations may contribute to clogged pipes which can affect water pressure). If the problems with your water pressure are a result of these or many other causes, a professional water well repair team should be able to diagnose and correct the problem, restoring your water pressure to its normal level. It should be noted that regular water well maintenance checks may catch many of these problems early, before they begin to have such noticeable and bothersome effects.

Another possible cause for diminishing or non-existent water pressure may have nothing to do with faulty or damaged equipment. Instead, it may be possible that the water reserves from which your well is drawing may in fact be running low. While this is not the most likely explanation, a professional well drilling and Repair Company will be able to determine if the water table is in fact running low and, if so, make adjustments to return the pressure to its normal level.

Intermittent Pump Cycling, or Short Cycling

Though some homeowners may imagine that the pump activates every time they turn on a tap -- and then closes each time they shut it off -- this is in fact not the case. Instead, the water well pump fills up a storage tank fitted with an air bladder. The pump fills the tank until it reaches a pre-set pressure, then shuts off. As you use water, the tank drains and the pressure decreases. Once the pressure reaches the low pre-set pressure, the pump turns on once again to refill the tank.

If everything is working as it should, a homeowner will notice the pump kicking on every so often, remaining active for a short period of time, then turning off until the next time it is needed. However, some pumps may begin to cycle intermittently, a process that is called "short cycling." Like low water pressure, short cycling can have many causes. If your water tank is leaking water, the tank may fill to its proper pressure, but because water is constantly flowing from the tank, the pressure drops rapidly and the pump turns on again a short time later. (You might also have other problems if you have a leaky water tank in your house!) Other causes may be a defective air bladder in the water tank, or damaged water pressure control switches, which measure the water pressure in the tank and tell the pump when to turn on and off.

Whatever the case may be, a professional water well repair team can diagnose the problem and come up with a plan to solve the short cycling problems.

Steve Buer is the owner of Buer Well Drilling, a well drilling company based in Caledonia, Michigan. A family owned business, Buer Well Drilling specializes in well drilling, well pump repair and many other services. Mr. Buer and his team provide water well service to Grand Rapids and its outlying areas. Visit for more information.

Posted By: KCW Water Well